Microlubrication control centres may be continuous or instantaneous lubrication systems.
They are complex devices which contain one or more of these items:
Microlubrication control centres are used when standard systems are not able to lubricate as it is needed.
AF8EG-V
|
- eight micropumps
- continuous system
- one solenoid valve
- a five litre tank with a low level switch
- eight stainless steel sheathed coaxial hoses
- eight 150 mm copper coaxial nozzles.
|
AFP4E-A-2-2E-V
|
- four micropumps coupled two by two
- continuous system
- a programmable controller with a graphic terminal which supports operator via touch screen
- a ten litre tank with an automatic filling device
- two flow meters
- dialog with the machine by contacts
- Ethernet dialog with the supervisor.
|
AF5R-3I-R-2V
|
- five double capacity micropumps in three groups
- continuous system
- a start-up manual valve
- three manual selectors
- fed with a low pressure by a pressure relief valve
- five transparent coaxial hoses
- a rack of five 150 mm flexible nozzles.
|
AP2E-2E-4R-V
|
- two micropumps
- a solenoid valve
- instantaneous system
- four 300 ml tanks
- two transparent coaxial hoses
- choice of the used tank by solenoid valves.
|
AF2E-2I-2V
|
- two double capacity micropumps
- a solenoid valve
- a five litre tank with a low level switch
- two transparent coaxial hoses
- two manual selectors to choose the used micropumps.
|
