|
Economic and ecologic minimum quantity lubrication systems for sawing, machining, cutting, stamping, assembly, lubrication of mechanical elements.
Spraying systems without mist for cutting, stamping and many applications. Achievement of specific studies and manufacturing of equipment adapted to your needs. Minimum quantity lubrication oils. |
Screen version
Previous Next
New web site
| Minimum quantity lubrication and microspraying control centers |
||
 |
 |
 |
 control centers are controlled manually or by a programmable controller. They integrate automatism functionsadapted to the needs. They can include a programmable controller, proportional pressure regulator .... They are often used for cutting and stamping processes. |
||
| The control centers range covers the applications which are outside the classical devices domain. The number of lubrication points is not limited. They often include automatism functions. | ||
| Presentation | Installed in boxes |
| Functionning | PULS, FLUX, piloted FLUX types, Mixed solutions. |
| Number of micropumps | Unlimited. |
| Output adjustment of the micropumps | Independent. |
| Oil supply | Large single reservoir Several reservoirs Direct pumping in a drum. |
| Output adjustment of air | Independent adjustment of air Single adjustment of air or by nozzle group. |
| Air supply of the nozzles | Selection by manual or automatic control Individual or total output of pressure adjustment on case Possible mixed solutions. |
| Active micropumps | Individual or by group selection |
Control center driven by switches |
|
 | Each nozzle is supplied with oil by a micropump. Micropumps are controlled by a signal generator. The oil volume adjustment is possible on each micropump. The air pressures adjustment is made by pressure regulators. Electric switches enable the active nozzle selection. |
Control center driven by programmable controller |
|
 |
Each nozzle is supplied with oil by a micropump. Oil volume adjustment is possible: - on each micropump (volume and beat frequency) The air pressure adjustment is made by pressure regulators. A programmable controller enables the definition of the parameters of : - the active nozzles selection - the micropumps cadence - the cycles, etc ... |
Specific control centers for the cutting stamping | |
 |
Lubrication of the band and in the tool. |
 |
Control center piloted by programmable controller : large flow lubrication for following tool, synchronised with the press and automatic filling up of the reservoir. |